Onboard video — A motherboard with onboard video is ideal. This means that you don’t have to waste any precious PCI or PCIe expansion slots on a video card. The quality or speed of the onboard video doesn’t matter, after all it will only be displaying text. If your motherboard does not have onboard video, it is highly recommended that you use a cheap PCI-based video card, preferably one that is passively cooled . You want to save your faster PCIe slot for expansion cards.
If not, try updating the BIOS and running this test again. It was updated only in the days of v4 and v5, has seen almost no updating since the advent of v6. That means most motherboards here may be obsolete, impossible to find, and are probably insufficient any way for a v6 system with Dockers and virtualization. A great resource for Xen capable setups is here.
If you want a quiet server, buy the 120mm fanplate and three good quality 120mm fans (look for fans with low noise and high airflow . Noctua and Delta are good brands. Choose ‘Boot Device Priority’ Set the 1st Boot Device as the USB Flash drive. PCIe x8 cards can be used in PCIe x4 slots if they fit mechanically. Of course, the performance will be just as PCIe x4 cards due to the limited bandwidth. JMB585 based cards seem to be ok, and include some 5 SATA port models that utilize an M.2 NVME interface which can be a good option to add ports without using a PCIe slot.
Can you just swap RAM sticks?
Some laptops have an access panel that lets you swap out RAM modules easily. Some have one or two RAM slots available through an access panel, while others are tucked away where you can’t really get to them. And some laptops don’t have RAM slots at all; their memory is soldered to the motherboard.
How do I install storage drivers?
The basic steps to install drivers for a hard drive are: 1. Configure the drive as a master or slave device (PATA only).
2. Mount the drive in the chassis.
3. Connect the data cable to the drive and to the PATA or SATA interface.
4. Connect a power cable to the drive.
5. Restart the system and run the BIOS Setup.
- I installed windows 2016 GUI for a test on wannabe hyper-V host.
- I found about 50 devices that need drivers and I clicked one-by-one right-click and update driver software and everything except coprocessor was clean .
- If selected the option, this software also let users know whenever an update is available.
- If you come in one of the above scenarios, then you will may realize that Windows cannot boot and crash with a BSOD error "STOP 0x B INACCESSABLE_BOOT_DEVICE".
Your screen should match the screenshot below. You can adjust text size by right-clicking the Title Bar, selecting Properties, followed by the Font tab, and choosing an appropriate font size. The Command Prompt’s default window size may be a problem when attempting to view the command output. To see more of the Command Prompt window than Intel hd 4000 driver what is illustrated above, right-click the Command Prompt title bar and select Properties.
Configure your memory settings as needed, continue and set "VirtIO " as network device, finish your VM creation. On the Suggested Partitioning screen, select Expert Partitioner.
And as I keep forgetting these steps myself too, I’m jotting them down here for future reference. These should mostly apply in the same way for Windows 10, Windows Server 2016, 2018 and 2019. Lenovo and also other suppliers cannot put into practice the chip-set characteristic in components, when different suppliers eliminate the driving force out of encouraging that.
Installing A Graphics Card
If you are on an older version of Windows, TRIM can be run through Samsung’s SSD Magician software. Techniques like TRIM and garbage collection will help maintain your solid state drive’s performance over time. When the SSD is not properly connected, it may not be detected. Connect the SSD to a different SATA Port and see if the drive is detected.